Procedure to Locate the Network Settings and Assigning the IP Address for Brother Printer Sep 11th, 2017   [viewed 12 times]

If you want to set up your network or want to access your IP address, then follow below given steps. In addition, Brother Printer customer service is also available via that you can experts help to fix all printer technical issues with ease.

Steps To Locate The Network Settings And Assigning The IP Address Are As Follows:-

Step 1: Go to the printer control panel, Home - > Network Settings -> Advanced IP Address Setup -> Ok

Step 2: Select Manual Static.

Step 3: Enter the IP Address for the printer:

Step 4: Create an IP Address for the printer, which doesn’t conflict with the Gateway IP Address such as 192.168.1.255.

Step 5: Enter the Subnet Mask as - 255.255.255.0-> provide the Gateway Address for your PC

Step 6: Verify that the printer accepted the IP address, select Home -> Network settings -> View Network Configuration, from your printer

Step 7: Select Start -> Run -> CMD, from your computer and then click OK.

Step 8: Reconnect your printer to your network.

Step 9: Using the printer network setup utility, reconnect your printer

Step 10: Select how you want to connect to the network and your network

In case you found above-given steps tough or tricky to follow and then call at Brother Printer customer service number to fix your issue with the help of experts.